Features

Specifications 

Structure

Square tubular Electrostatic power coated steel sections. 

Top tray

Ring top tray for monitor. 

Table Top 

Stainless Steel.

Drawer 

One Large storage drawer. 

Cylinder Yokes 

Gas specific yokes & gauges with claming bars, dual for Oxygen and Nitrous Oxide. 

Mobility 

For large diameter anti static castors have brakes. 

Pressure Gauges

Two each for Oxygen & Nitrous Oxide. 

Regulators

For higher efficiency & reliability two each for oxygen & Nitrous oxide.

Non-return cum pressure release valve

Minimizes risk of back flow of gases, blows off when pressure exceeds 200cm H2O. 

Oxygen failure warning device

Pneumatic device, which activates audible alarm (for minimum 10 seconds) when oxygen supply pressure falls to 205 kpa.

Vaporizers

Space for three vaporizers provided as standard Vaporizers are optional.

Flow meters

Long (up to 260mm) rotating bobbin flow meters calibrated in double/triple scale, antistatic & non-interchangeable.
Oxygen 100ml/min. to 10 liters/min.
Nitrous oxide 100ml/min to 12 liters/min
Oxygen being a preferred gas kept on downstream of other gas.

Oxygen flush

Emergency oxygen flush outlet button at table level (36-50lit/min) 

Change over unit

Change over unit is provided for open or close circuit. 

Breathing circuit 

Standard magill's circuit. 

Nitrous cut-off 

Provide Nitrous cut-off system prevents risk of administering 100% Nitrous oxide in absence of oxygen pressure.

Standard accessories

One/two built in oxygen outlets (422 kPa) for driving ventilators, (sufficient space for ventilator), extended rear platform for two 10 ltrs water capacity cylinders, key spanner for a type cylinders and facemask for adult and paediatric.

Optional

Uncalibrated Vaporizers: Goldman / Ether Vaporizers are supplied on demand. Oxygen ratio controller: To prevent administering less than 25% oxygen in patient circuit. Circle Absorber: Single / double chamber as required. Bain Circuit (adult & paed) Extra Rebreathing bag (antistatic) 0.1, 1, 1.5 litre. Gas Scavenging system: Provides active and Passive waste / expired gas scavenging. Flow meters can be configured for 3-tube flow meter (with air) or 5 tube cascade for low flow.

Basal Flow, Cylinders, Bulk conversion unit for O2 & N2O 

Laryngoscopes, Oxygen therapy equipments etc. Anaesthesia Systems are also available in stainless steel structure.